๐Ÿ›ก๏ธ Q3 2026 Vendor Review: 14 suppliers checked for named labs and verifiable COAs. View Lab Scorecard →
Longevity & Cellular

MOTS-c

Molecular Research Profile ยท Target purity > 99.0% ยท Half-life Intermediate

Published bySteffen HartmannBiohackTested Editorial TeamLast updated:

Mitochondrial-derived peptide (MDP) encoded in the 12S rRNA region of mtDNA. Regulates metabolic flexibility, insulin sensitivity, and nuclear-mitochondrial crosstalk โ€” a key mediator of the mitochondrial stress response.

Key factsResearch-grade MOTS-c should test at > 99.0% purity by third-party HPLC, with mass spectrometry confirming identity (expected molecular weight 2174.6 g/mol). Molecular formula: C101H152N28O22S2. CAS: 1627580-64-6. Reported half-life: Intermediate. Standard reconstitution: 2.0 ml BAC water for 10mg vial.Last updated: 2026-10-04
CategoryLongevity & Cellular
Typical Purity Goal> 99.0%
Half-LifeIntermediate
Standard Reconstitution2.0 ml BAC water for 10mg vial
Research Dose Range5 - 10 mg / 2-3ร— weekly
Top Audited VendorCertaPeptides

MOTS-c Molecular Formula, Structure & Chemical Identity

Reference identifiers researchers use to verify that a vial matches what a vendor claims to have shipped. Cross-check these values against any Certificate of Analysis before accepting a purity figure.

Molecular FormulaC101H152N28O22S2
Molecular Weight2174.6 g/mol
CAS Number1627580-64-6
Amino Acid Count16
Amino Acid SequenceMet-Arg-Trp-Gln-Glu-Met-Gly-Tyr-Ile-Phe-Tyr-Pro-Arg-Lys-Leu-Arg
Sequence (1-letter)MRWQEMGYIFYPRKLR
Also Known AsMitochondrial ORF of the 12S rRNA type-c
PubChem CID146675088 ↗

Identifiers verified against the NIH PubChem compound database. Molecular weights independently recalculated from the molecular formula using IUPAC 2021 standard atomic weights.

How to Read a MOTS-c Certificate of Analysis

A COA is only meaningful if the identifiers on it match the compound you ordered. Four checks, in order.

  1. 1. Identity โ€” does the formula match?The COA header should state C101H152N28O22S2 and a molecular weight near 2174.6 g/mol, with CAS 1627580-64-6. A mismatch means you are not looking at a COA for this compound.
  2. 2. Purity โ€” HPLC chromatogram, not just a numberA printed “> 99.0%” with no chromatogram is a marketing claim. Demand the actual HPLC trace: a single dominant peak, labelled retention time, and an integration table. Shoulders or unlabelled side peaks are unreported impurities.
  3. 3. Mass confirmation โ€” does MS agree with the formula?Mass spectrometry should report an observed mass consistent with the expected 2174.6 g/mol. Peptides are frequently reported as multiply charged ions, so the raw m/z value will be lower than the neutral mass. An unexplained offset is a red flag.
  4. 4. Provenance โ€” who signed it, and for which batch?A valid COA names the testing laboratory, carries a batch or lot number that matches your vial label, and is dated. A vendor-produced PDF with no lab identity and no batch number is not third-party evidence.

Full methodology in ourguide to the 5 COA red flags researchers miss, or verify the reconstitution math with thepeptide reconstitution calculator.

Mechanism of Action

MOTS-c (Mitochondrial Open Reading Frame of the 12S rRNA-c) is a 16-amino-acid mitochondrial-derived peptide โ€” one of a growing class of bioactive peptides encoded within mitochondrial DNA rather than nuclear DNA. This is significant because it represents a direct line of communication from mitochondria to the nucleus: MOTS-c translocates to the nucleus under metabolic stress conditions and regulates nuclear gene expression, particularly genes involved in glucose and fatty acid metabolism.

Mechanistically, MOTS-c acts through at least three pathways: (1) AMPK activation via direct binding to the folate cycle enzyme MTHFD2, increasing AICAR levels and triggering AMPK phosphorylation โ€” this enhances glucose uptake and fatty acid oxidation independent of insulin signaling; (2) SIRT1 activation via NAD+-dependent deacetylation, promoting PGC-1ฮฑ-mediated mitochondrial biogenesis; (3) nuclear gene regulation via direct chromatin interaction, upregulating antioxidant response elements (AREs) and suppressing NF-ฮบB-driven inflammation.

What makes MOTS-c unique among research peptides is its mitochondrial origin: it is one of the few peptides that signals "mitochondrial health status" to the rest of the cell, making it a key research tool in mitohormesis and metabolic flexibility studies.

Research History & Context

MOTS-c was discovered in 2015 by Dr. Pinchas Cohen's lab at the University of Southern California, as part of a systematic search for open reading frames within mitochondrial DNA that could encode functional peptides. The discovery challenged the long-held assumption that mtDNA encodes only 13 proteins (all OXPHOS subunits), revealing a hidden peptide layer of mitochondrial gene expression.

Mouse studies demonstrated that MOTS-c administration prevents age-dependent and high-fat-diet-induced insulin resistance, increases skeletal muscle glucose uptake, and enhances physical endurance. Human studies (observational) have correlated lower MOTS-c levels with obesity and type-2 diabetes. The peptide has generated significant interest in the longevity research community as a potential mediator of the metabolic benefits of exercise, and as a tool for studying mitochondrial-nuclear communication pathways.

Storage & Handling

Store lyophilized MOTS-c at -20ยฐC, protected from light. Stability data is more limited than for older peptides; conservative protocols recommend use within 12 months. The peptide's secondary structure includes a ฮฒ-turn motif stabilized by hydrophobic interactions โ€” avoid excessive agitation during reconstitution.

Reconstituted MOTS-c should be stored at 2โ€“8ยฐC and used within 14 days. Due to the 2โ€“3ร— weekly research protocol, a single 10mg vial typically covers 1โ€“2 weeks of research. The solution is clear and colorless; any turbidity indicates aggregation and the vial should be discarded.

Reconstitution & Research Dosing

For MOTS-c, the standard laboratory reconstitution is 2.0 ml BAC water for 10mg vial. A typical research study window uses 5 - 10 mg / 2-3ร— weekly.

For a 10mg MOTS-c research vial, add 2.0 ml BAC water (5.0 mg/ml = 5 mg per 1.0 ml). The relatively high research dose means injection volumes are larger than for microgram-range peptides โ€” use a standard 1ml syringe rather than an insulin syringe for doses >5 mg. MOTS-c has been researched both as monotherapy and in combination with NAD+ for synergistic metabolic effects.

Use the Reconstitution Calculator for exact syringe units →
Recommended Research Source
CertaPeptides โ€” 99.4% Avg Purity (vendor-stated; per-batch reports at Janoshik), 3rd-Party HPLC/MS
View Vendor Review →

Audited Vendors Stocking MOTS-c

Each review checks whether the testing lab is named and whether COAs can be verified at the issuing lab.

Related MOTS-c Research

MOTS-c FAQ

QWhat is the molecular formula of MOTS-c?

MOTS-c has the molecular formula C101H152N28O22S2 and a molecular weight of approximately 2174.6 g/mol. Its CAS registry number is 1627580-64-6. It is a 16-residue peptide with the sequence Met-Arg-Trp-Gln-Glu-Met-Gly-Tyr-Ile-Phe-Tyr-Pro-Arg-Lys-Leu-Arg.

QHow do you verify a MOTS-c Certificate of Analysis?

Check four things in order. First, identity: the COA must state C101H152N28O22S2 and CAS 1627580-64-6. Second, purity: require the actual HPLC chromatogram with retention time and integration table, not just a printed percentage. Third, mass confirmation: the mass spectrometry result must agree with the expected molecular weight of 2174.6 g/mol, allowing for multiply charged ions. Fourth, provenance: the COA must name the testing laboratory and carry a batch number matching your vial label.

QWhat purity should MOTS-c be?

Research-grade MOTS-c should meet a purity target of > 99.0%, confirmed by third-party HPLC analysis rather than a vendor self-declaration. A purity claim without an accompanying chromatogram carries no evidential weight.

QHow much bacteriostatic water do you add to MOTS-c?

The standard reconstitution for MOTS-c is 2.0 ml BAC water for 10mg vial. For a 10mg MOTS-c research vial, add 2.0 ml BAC water (5.0 mg/ml = 5 mg per 1.0 ml). The relatively high research dose means injection volumes are larger than for microgram-range peptides โ€” use a standard 1ml syringe rather than an insulin syringe for doses >5 mg. MOTS-c has been researched both as monotherapy and in combination with NAD+ for synergistic metabolic effects.

Research Use Only (RUO): MOTS-c is discussed strictly as an in-vitro laboratory research compound. Nothing on this page constitutes human or clinical administration guidance. Always verify purity through independent third-party HPLC/MS analysis before use.